3D Printed ideas
  • Home
  • Badpter
    • 3DPSlots
  • NiSi
    • Filtros drones DJI
  • Shop
  • Blog

Starting the mass production / Empezando la producción en masa

24/5/2014

1 Comentario

 
Picture
After a huge amount of tests and changes the Badpter is in the "production" stage.
Due to the investment necessary to produce the aluminium adapter the first version going to the market will be the Lee compatible adapter.
Después de muchísimas pruebas y cambios el Badpter está finalmente en el estadio de producción.
Debido a la inversión necesaria para producir la versión en aluminio, la primera versión en ver la luz en la tienda será el adaptador compatible con el portafiltros Lee.
1 Comentario

Testing the Badpter

17/5/2014

0 Comentarios

 
Yesterday I received the new 3D printed rings to insert in the Badpter (aluminium adapter) and I test it in my lenses working as I expected. I will have to harden the lens fixation to achieve a better sensation in the bayonet but this is a minor change.
Picture
Today I decided test the Badpter outside to see how it works, I know that the "sample" adapter it not the best to take photos due to the aluminium bright (flares) but to see some technical aspects it enough.

When I was driving to take some photos in a beautiful village near "Vilafranca del Penedes" I found an incredible fashion hotel that hook me, I stopped the car and took some photos with the adapter and the Haida ND1000.
Picture
Adapter without filters
Picture
Adapter + Haida ND1000
I had hard problems with flares due to the sun position, I know that was not the best hour to take photos, maybe was the worst, but I'm not very satisfy with the Lee holder. I didn't correct the temperature of the photo took with the Haida filter because I like the warmer finishing.
Picture
Place: Cava & Hotel MasTinell
0 Comentarios

Is it possible to improve the Lee slots?

15/5/2014

0 Comentarios

 
Yes, it is possible and I will test a new design slot that don't have vignetting in a FF using a Canon 16-35 f/2.8  lens (theoretically).

These slots could be a good complement to do an improvement pack for the Lee holder in combination with the Badpter.
Picture
0 Comentarios

Step by step

12/5/2014

4 Comentarios

 
First test of the aluminium "sample" adapter with a Lee compatible holder.
4 Comentarios

Waiting the aluminium Lee sample

7/5/2014

0 Comentarios

 
In some days I will receive the Lee aluminium sample from my workshop to start the testing process, I'm very excited...
Imagen
0 Comentarios

The NIKON bayonet BH-23 is ready

7/5/2014

0 Comentarios

 
At last some good news. 

While I'm trying to solve the VeroBlackPlus situation I'm working in new lens bayonets and today I test the adapter in the AF-S DX NIKKOR 10-24mm f/3.5-4.5G ED with satisfactory results.
0 Comentarios

The shop will remain closed until I found what is happening

2/5/2014

0 Comentarios

 
Some post before this one I said that the adapter will be printed with a better material from Stratasys, the VeroBlackPlus.

The company invest a good quantity of money to buy this new material VeroBlackPlus from Stratasys to offer a better product giving to the adapter a harder structure and better dimensional qualities. 

After some tests we decided to throw away all the VeroBlack adapters (this is a lot of money) in stock to send the best material to the buyers, 3DPideas want to offer a high quality products.

Today I received some adapters directly from the printer company to have in stock and they were bent, the same problem that we had with the VeroBlack. 

Due to this I decided to close the shop and do a complain to Stratasys to found what is happening with this material because this problem don't exist with other materials/colors like the VeroWhitePlus o VeroGreyPlus, it's possible in one of the 3DPideas videos to see the VeroWhitePlus working.

For my is so hard to write this at this moment, when this young company is starting. but 3DPideas will not sell anything if we are not totally sure that it will works perfect.

On the other hand, we are working hard in the aluminium version that will be available soon, with this adapter 3DPideas will join the best of the 3D printing with high tech aluminium.

For any problem with your adapter please contact with me 3dpideas@3dpideas.net

Héctor González
3D Printed Ideas
0 Comentarios

    Archives

    octubre 2021
    julio 2021
    marzo 2020
    junio 2019
    mayo 2019
    marzo 2019
    febrero 2019
    septiembre 2018
    junio 2018
    abril 2018
    Diciembre 2017
    noviembre 2017
    octubre 2017
    agosto 2017
    junio 2017
    mayo 2017
    abril 2017
    marzo 2017
    noviembre 2016
    octubre 2016
    septiembre 2016
    agosto 2016
    mayo 2016
    abril 2016
    febrero 2016
    Diciembre 2015
    noviembre 2015
    octubre 2015
    julio 2015
    junio 2015
    mayo 2015
    abril 2015
    marzo 2015
    febrero 2015
    Enero 2015
    Diciembre 2014
    noviembre 2014
    octubre 2014
    septiembre 2014
    agosto 2014
    julio 2014
    junio 2014
    mayo 2014
    abril 2014
    marzo 2014
    febrero 2014

    Categories

    Todos
    3dpslots
    60
    Adaptador
    Adapter
    Aluminium
    Badpter
    Bayonet
    Benro
    Canon
    Cokin
    Concurso
    Filter
    Filters
    Filtros
    Haida
    Hasselblad
    Hitech
    Holder
    Lee
    Nikon
    NISI
    Packaging
    Poll
    Shop
    Sigma
    Slot
    SONY
    Tamron
    Tokina
    Zeiss

    Fuente RSS

    View my profile on LinkedIn

Sobre nosotros

Quines somos
​Contacto

Privacy Policy

Síguenos

Picture
Picture
Picture

Galeria

Picture
  • Home
  • Badpter
    • 3DPSlots
  • NiSi
    • Filtros drones DJI
  • Shop
  • Blog